Installing the LED motion sensor stair light kit is a great way to make your stairs more attractive while reducing safety risks. These lights come with a motion sensor that detects the movement of people and automatically turns on the LED strip lighting. They also have a Glow Mode feature that allows the LEDs to stay on at low light levels to conserve battery life.
Step 1: Get the Stairs Ready for LED Lighting
Before install the motion sensing lights for stairs you need to do is to ensure that your stairs are in good condition. This includes checking that all of the steps are straight and that the handrails are not sagging. You can also check if there are any other potential hazards like cracks in the stair tread or uneven landings.
Next, you should prepare the area where you are going to mount your stair lights. This may include removing the old carpets and lining the floor with a plastic sheeting to prevent dirt from accumulating on the stairs.
After you are sure that everything is prepared, it is time to start the installation process. Luckily, the LED strip light system is very easy to set up and can be installed by anyone with basic skills and tools.
Once you have the staircase ready for the lighting, it is time to begin placing the strips along the stair surface and attaching the channels. Before you start the installation, it is important to determine how many feet of the strips will be needed. Once you have this information, it is time to cut the strips to their required lengths with sharp scissors.
Then, lay out all the connectors, aluminum channels, wires, and components that you will need to use in the process. Be sure to follow the polarity (positive and negative) markings on each LED strip. You should make sure that the polarity is consistent throughout the run of lights, connectors, and power supply.
Take Care to Prepare All Stairs for the Lighting
Before you begin the installation process, it is important to be aware of any potential hazards that your stairs may have. For example, if there is cracking in the stair treads or if there are uneven landings, these should be repaired before you begin.
Another thing that you need to consider is the stair lighting power supply. This is because the stair lighting system will need a power source that can handle the amount of energy that it needs to be running. This is because the stair lights will be using a high-powered LED strip that is capable of emitting more energy than the typical florescent lights in your home.
It is best to use a power supply that has a rating of at least 60W. This is so that the stair light system will have enough power to light up the stairs and the space underneath.
You should also take the time to check the power cords for any damage that may be present. This will help you to prevent any unnecessary damages and expenses in the future.
