Are you looking or searching for the Wavlink AC600 instructions? WiFi extender is one of the devices which helps us improve your internet performance. WiFi devices are best for the internet or indoor services but if you have a big house or office then you will need to expand its outdoor area as well. Make sure you will need to pick a waterproof AC600 outdoor WiFi extender.
Specifications Of Wavlink AC600 Outdoor Extender
- AC600 supports dual frequency bands 2.4GHz and 5GHz.
- On its panel, you can easily get the reset button.
- The WPS button is a very easy way to do its configuration.
- It has two omnidirectional and detachable WiFi antennas.
Access Wavlink Extender Web Management Page
- First, in the wall socket settle the Wavlink AC600 extender power plug.
- Now, take the computer or a laptop and link it with the Wavlink AC600 outdoor extender.
- After that, open the browser and enter wifi.wavlink.com to access the web management page.
- Next, fill in all the details shown on the display page.
- In the end, tap on the login button to complete the Wavlink WiFi range extender login process.
Outdoor AC600 Extender Configuration Through WPS Button
Before beginning this method, make sure that your existing router must support the WPS button.
- Place or settle your extender near the router to start this method process.
- Next, wait for a few minutes to see the solid green power LED.
- After that, switch on your Wavlink AC600 extender device.
- Now, push the WPS button on your extender and existing router.
- Further, the WPS LED on both gadgets starts blinking solid.
- This means the Wavlink AC600 setup is complete.
Try another method, if you fail to do this method.
By AP Mode:
- First, you will need to connect the PoE in the port of the unit to the POE port of the converter with the help of an ethernet cable.
- After that, join the DATA/LAN IN port to the LAN port of the modem or router unit.
- Now, plug in the Wavlink AC600 power adaptor in the power socket.
- Next, turn on the unit and take the WiFi gadget such as a computer or laptop.
- Later, connect the WiFi gadget to the Wavlink AC600 outdoor WiFi extender network.
- Now, enter an IP address 192.168.10.1 in the computer Chrome.
- In the end, consider all the display instructions to do the Wavlink AC600 setup.
Troubleshoot Wavlink AC600 Outdoor Extender Issues
Get AC600 Extender Latest Software Version:
- First, take the computer and connect or join it with the Wavlink AC600 extender network.
- Next, open Chrome and enter the default web portal wifi.wavlink.com in the address bar.
- Now, you will visit the Wavlink settings page.
- Further, look for an administration option and then click on the software upgrade option.
- In the end, download the file on your computer and laptop.
Place It At the Perfect Location:
Due to the improper placement of the extender, you can face trouble after doing the Wavlink AC600 setup. To fix the issue we suggest you locate or place your Wavlink AC600 outdoor extender at the central location of your office and house. Make sure your device does not settle near the metal or electronic appliances because they absorb all the WiFi signals which come from the router and extender device.
Disable Extra WiFi Connected Devices
After trying the above solutions, if the extender issue is not resolved then try this method.
- First, go to the Wavlink extender settings page.
- After that, pick the number of WiFi-connected devices options.
- Now, if you see any extra WiFi gadget which is connected to the Wavlink extender network then immediately remove it.
Power Cycle Wavlink Extender
- First, push the power button to turn off your Wavlink AC600 extender device.
- Now, take out the power plug of the extender from the wall socket.
- Next, wait a while and put back the plug of the extender in the socket.
- In the end, turn on again your Wavlink AC600 outdoor extender.
Reset AC600 Extender
- To begin with, power on your smart gadget.
- After that, make sure your WiFi device and router must be connected with an ethernet cable.
- Now, push the Wavlink AC600 outdoor extender reset button.
- Further, all the LEDs of the extender will be turned off.
- As it means, the unit is now completely reset.
Note: After doing the Wavlink AC600 outdoor extender reset, you will need to do the login and configuration process again.
Tip: If you are having another model number of Wavlink extender in your office and house such as an AC1200 WiFi extender and want to do the login and configuration process of that device then you will need to go to the Wavlink AC1200 setup page and consider all the on-screen directions.
If you want much further information about the Wavlink device, then stay closer or near to this article. If you have a question in your mind then don’t hesitate to contact our Wavlink team experts.
